FEATURES AND BENEFITS
● Thermal Conductivity: 6.0 W/m-K
● Dispensable pre-cured gel
● Stable viscosity in storage and in the application
● Excellent chemical stability and mechanical stability
BERGQUIST LIQUI FORM TLF 6000 thermally conductive gel interface material is designed to meet the demanding requirements
in certain telecom market applications. Its unique formulation assures a balanced mix of high thermal conductivity, good dispensing
efficiency and high thermal reliability. This material is specially designed to provide effective electronic component cooling capability for
5G base station and remote antenna assembly where a highly reliable vertical gap stability is required.
BERGQUIST LIQUI FORM TLF 6000 is pre-cured, requiring no mixing or refrigeration.
TYPICAL APPLICATIONS
● RRU/AAU/BBU in wireless in telecom wireless infrastructure
● Filling various gaps between heat-generating devices to heat sinks
● Devices requiring low assembly pressure
● High value assemblies with rework
TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties
Viscosity, Pa∙s: Low shear rate, 1.0 s -1 , ASTM D2196 1,500
High shear rate, 100 s -1 , ASTM D5099 750
Dispense Rate, EFD 30cc syringe, 90psi (1) , grams/minute (1) 12
Outgassing, % total mass loss, ASTM E595, % 0.07
Flammability @ 1.0 mm, tested in-house UL 94 V-0
Electrical Properties
Volume Resistivity, 5 V DC, ASTM D257, ohm-meter 3.25×10+10
Dielectric Strength , ASTM D149, V/mm 5,400
Dielectric Constant @ 1,000 Hz 5.7
Thermal Properties Thermal Conductivity, ASTM D5470, W/(m-K) 6.0
